Cyber 1
701 Club - QQ All-Star
- Joined
- Sep 14, 2011
- Messages
- 732
Question I'm currently running the 205 as 5.1 rca to my AVR system (HDMI set for Video only) and I was not sure on if it's possible to also hook up the stereo rca outputs to my pre-amp for my stereo system with full range speakers (no sub).
So how do I go about doing this to take advantage of the better dac on the dedicated stereo outputs?
the manual is saying:
Stereo Signal: To select the audio source that will be processed and sent out through the STEREO and the XLR BALANCED STEREO audio terminals. The available options are:
1) Down-mixed Stereo (default) – The stereo or down-mixed stereo signals are processed and sent out from the dedicated stereo output terminals.
2) Front Left/Right – The original Front Left (FL) and Front Right (FR) signals are sent out from the dedicated stereo output terminals. The purpose is to fully utilise the better DAC hardware originally assigned to the dedicated stereo outputs for customers who prefer multichannel speakers and do not need the dedicated stereo output or zone 2 output. When this option is selected, the dedicated stereo output ports should be used as the Front outputs of the 7.1ch / 5.1ch / Stereo Audio group. The original FL/FR RCA connectors should not be connected.
So how do I do this and still have the 5.1 rca's hooked up and also the 2 stereo rca's always hooked up? If I use #1 with a stereo SACD disk is it only being processed in the 2 better dac's or is it being processed in the 2 of the multi channel dac's?
also just wanted to make sure I did'nt make a mistake in anyway after reading "The original FL/FR RCA connectors should not be connected."
So I will be ok with the planned hook up of all the rca's if I use #1?
So how do I go about doing this to take advantage of the better dac on the dedicated stereo outputs?
the manual is saying:
Stereo Signal: To select the audio source that will be processed and sent out through the STEREO and the XLR BALANCED STEREO audio terminals. The available options are:
1) Down-mixed Stereo (default) – The stereo or down-mixed stereo signals are processed and sent out from the dedicated stereo output terminals.
2) Front Left/Right – The original Front Left (FL) and Front Right (FR) signals are sent out from the dedicated stereo output terminals. The purpose is to fully utilise the better DAC hardware originally assigned to the dedicated stereo outputs for customers who prefer multichannel speakers and do not need the dedicated stereo output or zone 2 output. When this option is selected, the dedicated stereo output ports should be used as the Front outputs of the 7.1ch / 5.1ch / Stereo Audio group. The original FL/FR RCA connectors should not be connected.
So how do I do this and still have the 5.1 rca's hooked up and also the 2 stereo rca's always hooked up? If I use #1 with a stereo SACD disk is it only being processed in the 2 better dac's or is it being processed in the 2 of the multi channel dac's?
also just wanted to make sure I did'nt make a mistake in anyway after reading "The original FL/FR RCA connectors should not be connected."
So I will be ok with the planned hook up of all the rca's if I use #1?