AlamoQuad
Active Member
Given the basic components listed below, how would you put together two separate systems? ...Not looking for opinions, judgements, or comments on the pros and cons of each item, thank you, just suggestions for setting up two systems from what's available. However, your rationale/reasoning for your placements is welcome. Example: System A = QRX-7001, Teac A-2340R, DBX-555, Teac A-640, so that 2-chan noise-reduced tapes could be made on this system and played on the other system.
This is what you have to work with:
Receivers:
NOTES:
1. Peripherals like turntables and equalizers are included but not considered here.
2. It is not required to use all the R2Rs in the two configurations; one or more could be 'excess' and used in a third environment, e.g., bedroom, dining room, etc.
1. Peripherals like turntables and equalizers are included but not considered here.
2. It is not required to use all the R2Rs in the two configurations; one or more could be 'excess' and used in a third environment, e.g., bedroom, dining room, etc.
This is what you have to work with:
Receivers:
- Sansui QRX-7001
- Sansui QRX-7500
- Teac X10R (2-chan rec/play, 7 and 10-inch reels)
- Teac A-2340R (2/4-chan rec/play, 7-inch reels)
- Teac A3340 (2/4-chan rec/play, 7 and 10-inch reels)
- Sansui SD-5050 (4-chan play, 2-chan rec/play, 7-inch reels)
- Sansui QD-5500 (2/4-chan rec/play, 7-inch reels)
- Teac C-3
- Teac A-640
- DBX-555 (4-chan)
- DBX-222 (2-chan)
Last edited:
