Audition CS6 - Sourund Mix?

Help Support QuadraphonicQuad:

HWKraus

New member
Joined
Mar 26, 2018
Messages
6
Location
Wien
Hi,
I have some 5.1 FLACs which I want to mix together. I can load them in Audition CS6 and insert them in a Multitrack Session. But when I mix them to Master only the front left/right channels have a signal. The other channels are shown but are empty.

Are there any tips for me?

Thanks in advance, Hans
 

Sonik Wiz

2K Club - QQ Super Nova
QQ Supporter
Joined
May 30, 2005
Messages
2,492
Location
Kansas City
Hi,
I have some 5.1 FLACs which I want to mix together. I can load them in Audition CS6 and insert them in a Multitrack Session. But when I mix them to Master only the front left/right channels have a signal. The other channels are shown but are empty.

Are there any tips for me?

Thanks in advance, Hans
I have an older version, but in that you would go to View>Surround Encoder & choose your method of export.

How do you like the newer version?
 

HWKraus

New member
Joined
Mar 26, 2018
Messages
6
Location
Wien
Thanks,
but CS 6 doesn't have that entry in View.
Audition 3.0.1 was the one I used in advance of CS 6. The thing I miss in CS 6 are the scientific filters of 3.0.1. I use CS6 mainly for tidying up LPs (de-clicking and de-noising) and trimming of recordings. I used scientific filters for trimming the frequency range of FM recordings. Therefore I'm not the best one to judge CS 6.
Hans
 

junh1024

Member
Joined
Jan 8, 2012
Messages
28
Your situation is a bit puzzling. Mind posting pictures of your session & mixer ?
 

HWKraus

New member
Joined
Mar 26, 2018
Messages
6
Location
Wien
Hi junh1024,
I hope these screen shots are what you want (my user interface is in German).
"SourceFileLoaded.png" is the source file in 5.1 which I want to mix to 5.1
"NewMultitrackSession.png" shows the parameters for creating a new multitrack session.
"EmptyMulitrackSession.png" shows the created - empty - multitrack session. On top in big the 'Track 1', still empty, and on bottom the Master in small.
"SourceFileLoaded.png" shows the session with the source file loaded in Track 1.
"NewMix.png" shows the settings for Multitrack/Mix Session in New File.
"MixReady.png" is the resulting new file, with LFE, C, LS and RS empty .
Thanks, Hans
 

junh1024

Member
Joined
Jan 8, 2012
Messages
28
Hi. You can delete your pictures now if you wish.

You have inserted a 51 file on a 20 track, so you are only getting 20 sound. Please insert your 51 file on a new 51 track to get 51 sound.
 
Top