I have an Onkyo TX-NR609 that gave me problems from it's HDMI board. I had it repaired under warranty, then a couple years later the problems were back. Eventually Onkly had a "trade in" program and I acquired a new 656 for a decent price and the serial number sticker from the 609.
Anyway, I would like to give a shot at repairing the HDMI board and I find that generally people replace a group of caps with upgraded ones and that very often fixes the problems.
My board has 5 caps that I believe are the correct ones, with the numbers "A4" "100" & "16v".
What I would like to find out is what would be an "upgraded" version of these capacitors since it's generally accepted that Onkyo often used inferior caps in their units? I can solder well enough I reckon and removing the old caps should be easy "rocking" them out.
Thanks for any help or especially a Digi-key number!
Anyway, I would like to give a shot at repairing the HDMI board and I find that generally people replace a group of caps with upgraded ones and that very often fixes the problems.
My board has 5 caps that I believe are the correct ones, with the numbers "A4" "100" & "16v".
What I would like to find out is what would be an "upgraded" version of these capacitors since it's generally accepted that Onkyo often used inferior caps in their units? I can solder well enough I reckon and removing the old caps should be easy "rocking" them out.
Thanks for any help or especially a Digi-key number!